Supercombinata SC1 40/1 COMPACT

STANDARD jobs (from Ø 42 – 250 mm)

Line boring  SUPERCOMBINATA SC1 40/1 Compact equipped with a 1800W 2-geared motor is suitable to carry out jobs from Ø 42 – 250 mm and by means of extra equipment the diameter range can be reduced down to Ø 22 mmThis model is different from the others by its compactness and lightness. Feed is endless by steps of Ø 600 mm

The SUPERCOMBINATA SC1 40/1 Compact can be equipped with additional accessories to make the following jobs:

– FACING
– BORING
– MILLING
– THREADING
– FLANGE FACING
– SEEGER CIRCLIPS

Elsa’s range of line borers & rotary welding machines have all the necessary equiment to be used immediately on site and they are compatible with any MIG/MAG power source with an euro connection.

» Geared transmission
» Permanent lubrification
» Synchronous feed & rotation motion enables a smoother rotary welding mode
» Conical supports
» Telescopic welding torch
» 110 V power supply also available on request

Supercombinata SC1 40/1 COMPACT Ø42 – 250 mm – Technical Data Sheet

DIAMETERS

» Boring bar diameter mm ø 40
» Boring bar length mm 2200
» In line boring mm ø 42 – ø 250
» External boring kit optional
» Internal welding mm ø 42 – ø 250
» External welding mm ø 42 – ø 250
» Drilling mm ø 10 – ø 45
» Tapping mm ø 10 – ø 45
» Thread kit optional
» Facing optional kit

ROTATION MOTOR

» AC motor single phase
» Power at rated speed 1800 W
» Speed
1° speed – range MAX 120 rpm (145 Output Torque)
2° speed – range MAX 400 rpm (45 Output Torque)

FEED MOTOR

» DC motor
» Power at rated speed 90 W
» MAX. SPEED 11 rpm
» Electromechanical feed system
» Manual/Automatic feed

WELDING TECHNOLOGY

» Spiral (continous with variable step)

LONGITUDINAL STROKE

» Unlimited with steps of 250 mm

ELECTRONIC CONTROL PANEL

» Voltage 220 V (50/60 Hz)
» Main switch
» Emergency switch
» Inverter cw/cww feed
» Inverter cw/cww rotation
» Potentiometer adjustment rotation rpm
» Potentiometer adjustment feed rpm
» Electrical absorption 2000 W

DIMENSIONS

» Length: 550 mm
» Width: 240 mm
» Height: 380 mm
» Weight central unit: 34 kg

Supercombinata SC1 40/1 COMPACT Ø42 – 250 mm – Standard equipment

» n° 1 Main unit
» n° 1 Electronic control panel
» n° 1 Boring bar ø 40 x 2200 mm
» n° 1 Boring bar ø 40 x 1100 mm
» n° 1 Boring bar extension 450 mm
» n° 1 Telescopic welding torch
» n° 1 Lance for external welding
» n° 5 Lance extension 35 mm
» n° 4 Long nozzle
» n° 4 Short nozzle
» n° 5 Long contact tip ø 0.8 mm
» n° 5 Short contact tip ø 0.8 mm
» n° 1 Box with 10 cutting edges
» n° 1 Tool holder right ø 12 x 100 mm
» n° 1 Tool holder left ø 12 x 60 mm
» n° 1 Special tool holder left ø 12 x 40 mm
» n° 1 Tool holder for boring from ø 100 to 250 mm
» n° 2 Main bar support
» n° 2 Additional support
» n° 1 Spindle centring kit
» n° 1 Spindle centring kit for blind holes
» n° 1 Dial gauge
» n° 1 Dial gauge support
» n° 1 Telescoping gauge up to ø 12 mm
» n° 1 Cable control panel/machine
» n° 1 Power cable 220v/control panel
» n° 1 Boring machine stand
» n° 1 Complete set of wrenches

Video
Photo
elsa-Serie-Supercombinata-3
ELSA - Serie Supercombinata
elsa-Serie-Supercombinata-4
elsa-Serie-Supercombinata-2