Supercombinata Easy

STANDARD jobs (from Ø 32 – 250 mm)

The model SUPERCOMBINATA Easy has a 1800W – 2 geared motor and its working range is from Ø 32 to Ø 250 mm.

Furthermore the SUPERCOMBINATA Easy can be equipped with additional accessories to make the following jobs:
– FLANGE FACING
– CREATION OF SEEGER CIRCLIPS

Elsa’s range of line borers & rotary welding machines are compatible with any MIG/MAG power source with an euro connection.

Line Boring Machine Supercombinata Easy FLANGE FACING,CREATION

» Geared transmission
» Permanent lubrification
» Synchronous feed & rotation motion enables a smoother rotary welding mode
» Conical supports
» Telescopic welding torch
» 110 V power supply also available on request

Supercombinata Easy Ø32 – 250 mm – Technical Data Sheet

DIAMETERS

» Boring bar diameter mm ø 40
» Boring bar length mm 2200
» In line boring mm ø 32 – ø 250
» Internal welding mm ø 32 – ø 250
» Facing optional kit

ROTATION MOTOR

» AC motor single phase
» Power at rated speed 1800 W
» Speed
1° speed – range MAX 120 rpm (145 Output Torque)
2° speed – range MAX 400 rpm (45 Output Torque)

FEED MOTOR

» DC motor
» Power at rated speed 90 W
» MAX. SPEED 11 rpm
» Electromechanical feed system
» Manual/Automatic feed

WELDING TECHNOLOGY

» Spiral (continous with variable step)

LONGITUDINAL STROKE

» Unlimited with steps of 350 mm

ELECTRONIC CONTROL PANEL

» Voltage 220 V (50/60 Hz)
» Main switch
» Emergency switch
» Inverter cw/cww feed
» Inverter cw/cww rotation
» Potentiometer adjustment rotation rpm
» Potentiometer adjustment feed rpm
» Electrical absorption 2000 W

DIMENSIONS

» Length: 680 mm
» Width: 240 mm
» Height: 380 mm
» Weight central unit: 41 kg

Supercombinata Easy Ø32 – 250 mm – Standard equipment 
» n° 1 MAIN UNIT
» n° 1 ELECTRONIC CONTROL PANEL
» n° 1 BORING BAR Ø 40 X 2200 mm
» n° 1 BORING BAR EXTENSION 520 mm
» n° 1 TELESCOPIC WELDING TORCH
» n° 5 LANCE EXTENSION 35 mm
» n° 4 LONG NOZZLE
» n° 4 SHORT NOZZLE
» n° 5 LONG CONTACT TIP Ø 0,8 mm
» n° 5 SHORT CONTACT TIP Ø 0,8 mm
» n° 1 BOX WITH 10 CUTTING EDGES
» n° 1 TOOL HOLDER RIGHT Ø 12×100 mm
» n° 1 TOOL HOLDER LEFT Ø 12×60 mm
» n° 1 SPECIAL TOOL HOLDER LEFT Ø 12×40 mm
» n° 1 TOOL HOLDER FOR BORING FROM Ø 100 TO 250 mm
» n° 2 MAIN BAR SUPPORT
» n° 2 ADDITIONAL SUPPORT
» n° 1 SPINDLE CENTRING KIT FOR BLIND HOLES
» n° 1 KIT FOR LINE BORING FROM Ø 32 TO 100 mm
» n° 1 DIAL GAUGE
» n° 1 DIAL GAUGE SUPPORT
» n° 1 TELESCOPING GAUGE Ø 12 mm
» n° 1 CABLE CONTROL PANEL/MACHINE
» n° 1 POWER CABLE 220V/CONTROL PANEL
» n° 1 BORING MACHINE STAND
» n° 1 COMPLETE SET OF WRENCHES

Video
Photo
elsa-Serie-Supercombinata-3
ELSA - Serie Supercombinata
elsa-Serie-Supercombinata-4
elsa-Serie-Supercombinata-2